Designing a beautiful water feature requires attention to detail, each aesthetic and mechanical feature must be individually considered. Building a strong mechanical infrastructure that minimizes maintenance requires the selection of hard-working elements well suited to your artistic vision and logistical design. Choosing the proper water distributor is an important step, and warrants consideration and research.

The Multi WD 1� water distributor is equipped with one inlet and three outlets. The inlet is a stepped hose adaptor that can fit several sizes of tubing for versatility (3/4� , 1�, 1-1/4�, 1-1/2� or 19mm, 25mm, 32mm, 38mm). The outlet size is 1� (25mm) allowing for optimum water flow. Each outlet is equipped with a flow control nozzle, so flow can be adjusted to the needs of the pond. The configuration of the Multi WD 1� creates optimal interaction between pump, hose and water outlet. If a double distributor function is required, amend the configuration by placing the sealing cap (included) over one of the outlets, restricting water flow. Creating a beautiful pond that requires minimal maintenance and reconfiguration is predicated on making proper decisions through the design and development phases.